View PSPRL9802_4195986.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PSPRL9802 Series
Active PFC 200 Watt Single Output AC/DC Switching Power Supply FEATURES
2 Year Warranty Optional Top Cover 90 ~ 264VAC Universal AC Input Approved to UL CUL TUV CE and CB Power Factor Corrected to EN61000-3-2 Class D Compact 1U Size & Power Density: 5.2 Watts/cu in. Providing Peak Power 600W within 500uS Duty Duration Convection-Cooled and with Forced Air Cooling Rating Options Protections: Short Circuit/ Over Load/ Over Voltage/ Over Temp
SPECIFICATIONS: PSPRL9802 Series
All specifications are based on 25 C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. INPUT SPECIFICATIONS Input Voltage 90 - 264VAC Full Range Input Frequency 47 to 63Hz Input Current 4A at 100VAC full load Inrush Current 35A max @ 110VAC with full load and cold start. Leakage Current 1.5mA max @ 240VAC Remote ON/OFF Designated as REMO on the CN3, requires a low signal to inhibit output. Hiccup mode. OUTPUT SPECIFICATIONS Output Voltage See Table Output Power Range 200 Watts max. Output Adjustability Output user adjustable 5% minimum. Total Regulation 1% Output Current See Table Ripple & Noise (peak to peak) See Table Transient Response Output voltage returns to within 1% in less than 500s for a 50% dynamic load, peak does not excess 5%. Hold-Up Time 20ms min. at 80% of full load. Overshoot Turn-on/off not exceed 5% over nominal voltage. Turn On Delay 1 second maximum at 120VAC. Remote Sense Designated as RS+ and RS- on the CN3 PROTECTION Over Voltage Protection Latching down will occur when output voltage exceeds 130% and recycle AC input to reset. Short Circuit Protection Trip without damage and auto-recovery. Over-Temperature Protection Protected in the event of excessive operating ambient 85C and automatic recovery. Over-Power Protection Hiccup mode 110-140%; auto-recovery. Input Circuit Protection A protected 250V/5A fuse inserted. GENERAL SPECIFICATIONS Efficiency 70% for 3.3V, 75% for 5V, 80% for 12V, and 83% minimum for other outputs @ 230VAC and full load. 1500 VAC input line to chassis (10mA DC cut off current, isolating 3000VAC primary to secondary Withstand Voltage windings. Primary to core 1500VAC. All for 3 seconds. Burn In 45 5C for one hour @ 230VAC with full load. PFC Active power factor correction meets EN61000-3-2 class D. Designated as PG on the CN3 will go high 100-500ms after regulation and goes low 1ms before loss of Power Good regulation. Power Supply On Green LED designated as LED 1 on the PCB. Grounding Test Apply 25A from ground pin of the three-prong plug to the far most earth. Max allowable resistance 0.1 ohm.
o
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797
PSPRL9802 Series
Active PFC 200 Watt Single Output AC/DC Switching Power Supply
SPECIFICATIONS (CONTINUED)
ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Operating Humidity Storage Humidity Vibration Cooling Fan Drive MTBF PHYSICAL SPECIFICATIONS Weight Dimensions Warranty SAFETY Emissions Safety Regulations 0C to +70C ambient, de-rating at 2.5% per degree from 50C to 70C. -20C to +85C 5% to 90% RH, non-condensing 5% to 95% RH, non-condensing Frequency 5 ~ 50Hz, acceleration 7.35 m/(s x s) on X, Y, and Z axis. 200W max. with 17CFM airflow or 150W max. convection cooling. 12VDC/300mA is available to drive an external fan. 100,000 hours (according to MIL-HBK-217F) at 30C. 650 grams max. 6.8(L) x 3.8(W) x 1.5(H) inches U-case 2 years FCC part15, CISPR 22 Class B, Conducted. Approved to UL60950-1, CSA C22.2 No. 60950-1-03, TUV EN60950-1, CE Mark (LVD) EN61000-3-2,3, and IEC61000-4 Series Regulations and CB.
OUTPUT VOLTAGE / CURRENT RATING CHART
Model Output Voltage Range Preset Voltage Output Current With Forced Air Convection Regulation Ripple & Noise
PSPRL9802SA PSPRL9802SB PSPRL9802SC PSPRL9802SD PSPRL9802SE NOTES
3 - 4 VDC 5 - 6 VDC 12 - 18 VDC 24 - 30 VDC 36 - 56 VDC
3.3 VDC 5 VDC 12 VDC 24 VDC 48 VDC
30A 40A 16.67A 8.33A 4.17A
22A 22A 12.5A 6.25A 3.13A
1% 1% 1% 1% 1%
50mV 50mV 1% 1% 1%
1. Providing peak power to 600W within 500uS for all models, longer duty duration need contact manufacture. 2. All output ranges are covered in agency certifications and the preset voltage will be set as standard models if nothing different is requested. 3. Maximum 200W continuous output, with minimum 17 CFM forced ventilation. 4. Maximum 150W continuous output with air convection, except PSPRL9802SA and PSPRL9802SB which power is limited to 22A. 5. Output is fully isolated. 6. 1% minimum load is required to maintain the ripple and regulation. 7. Ripple and noise measured from 10KHZ to 20MHz at output terminals with parallel 0.1uF ceramic and 22uF electrolytic capacitors. 8. Optional top cover available please call factory for more details.
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797
PSPRL9802 Series
Active PFC 200 Watt Single Output AC/DC Switching Power Supply MECHANICAL DRAWINGS
Overall Size: 6.8(L) x 3.8(W) x 1.5(H) inches; Weight: 650g.
Output Pin Assignment Howder Molex Vo+: Pins 1 - 2 Vo+: Pins 1 - 6 Vo-: Pins 3 - 4 Vo-: Pins 7 - 12
AC Input Connector (CN1): Mating Molex Part No. 09-91-0500 or equivalent (5pin, 3used) PCB is Labeled: L = Line; N = Neutral; G = Chassis Ground Mating Pins; Molex Engineering Series 2478, 2578, 8818 or Howder Terminal block Part No. FTB-702-3P (3 pin). Output Connector (CN2): Mating Molex Part No. 09-91-1200 (12 pin) or Howder Terminal block Part No. HD-301-4P (4 pin). Output Pin Assignment: (See table above). Logic signal connectors (CN3): Mating JST XHP-5 or equivalent (CHYAO SHIUNN JS-2001-06). Mating Pins: JST SXH-002T-P0.6 for AWG 30 to 26. Fan Drive: Mating JST XHP-2 or equivalent (CHYAO SHIUNN JS-2001-02). Mounting Inserts: 8 Places M4. Maximum Penetration 4mm see outline drawing for location.
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797

▲Up To Search▲

Price & Availability of PSPRL9802

	To Download PSPRL9802 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .